Lantronix Com Port Redirector Quick Start Manual - page 9
8
2. Do one of the following:
To select com ports individually, select the appropriate checkboxes.
To select a range of com ports, enter the beginning and end of the range to the right
of the Check (Range) button and click the button.
To select all of the com ports, click the Select All button.
To clear all checkboxes, click the Select None button.
3. Click
the
OK button. The dialog box closes. The added com ports display in red and are
identified as new. The word "Modified" displays at the bottom of the window.
4. To save the settings, click the Save icon
.
To remove a com port:
1. Click
the
Add or Remove icon
, or select Add and Remove from the Com Port
menu.
2. Do one of the following:
To remove com ports individually, clear the appropriate checkboxes.
To remove a range of com ports, enter the beginning and end of the range to the right of
the Uncheck (Range) button and click the button.
To select no checkboxes, click the Select None button.
3. Click
the
OK button. The dialog box closes. Removed com ports that were never saved
no longer display. Removed com ports that were saved previously have "marked for
deletion." beside their names.
4. To save the changes, click the Save icon
. The removed com ports no longer display.
4. Configure the Com Port
You must configure a new com port before it can be used by any communications software.
To configure com port settings:
1. Click the com port in the tree structure. The Settings tab displays.
Note:
Alternatively, double-click the com port on Com Port List tab.