Lantronix Com Port Redirector Quick Start Manual - page 7
6
Com Port
List Setting
Description
the connection attempt.
TORec Yes indicates CPR will re-establish the connection if a
connection times out.
KpAlv Yes indicates TCP KeepAlive is enabled.
2. Search for Device Servers
Use the search feature to list the Lantronix device servers currently on the network. You can
name a device server and its TCP port and hide or display the list of devices servers.
Note:
This version of CPR does not detect the following Lantronix products: MSS, ETS, SCS,
MPS, and EPS.
To list device servers:
1. Click
the
Search icon
. A list of Lantronix device servers on the local network
displays in the bottom pane of the window.
2. View the following information about the device server, if available:
Device
Seting
Description
IP
Address
IP address of the device server to which the com port is
connected.
TCP Port
Serial port (channel 1 or channel 2) on the device server to which
the com port is connected. All MSS products use port 3001 for
channel 1 and 3002 for channel 2. All CoBos products (UDS,
CoBox, and XPress) and XPort products use port 10001 for
channel 1 and 10002 for channel 2.
Note:
For instructions on configuring port numbers using Telnet
or a web interface, see the user guide for the Lantronix device
server.
Device
Name
A user-supplied name that identifies the device server.