2008 copyright © lantronix is a trademark of lantronix. All rights reserved. 900-511 rev.B 4/08 securelinx ™ slb branch office manager quick start guide securelinx ™ slb branch office manager.
Securelinx ™ slb branch office manager quick start guide table of contents system overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 what’s in the box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....
What’s in the box in addition to the slb, the box contains this quick start guide, a documentation cd, appropriate power inlet cord, and a starter kit of commonly used serial adapters and cables. A variety of power cord types and additional adapters are available separately. See the lantronix websit...
4 w w w . L a n t r o n i x . C o m connecting the slb the slb connects between a server or a piece of it equipment and an ip network or the internet. Once installed on the ip network, a remote user connects to the slb using a secure web browser (https/ssl), secure shell (ssh), or telnet session. If...
6 w w w . L a n t r o n i x . C o m connecting the slb continued for example, to connect a pc to the device port of the slb, you only need the female db9 adapter (part #200.2070a) and a standard cat-5 cable, both of which are supplied with the slb. The default communication parameters for the device...
8 w w w . L a n t r o n i x . C o m 9 q u i c k s t a r t g u i d e s l b b r a n c h o f f i c e m a n a g e r ip addressing both of the slb network ports (eth1 and eth2) default to dhcp-assigned ip addresses. If you want to assign a different ip address, it must be within a valid range, unique to ...
Configuring network (ip) settings continued 5. Press the down arrow button to display the subnet mask setting. 6. Edit the subnet mask in the same fashion as the ip address and press the down arrow. 7. Edit the gateway and dns settings. 8. Press the down arrow after the dns 3 setting to go to the sa...
Logging in to the command line interface to access the command line interface 1. Do one of the following: • with a network connection, use a telnet or ssh program to telnet or ssh to xx.Xx.Xx.Xx (the ip address in dot quad notation), and press enter.You should be at the login prompt. Note: by defaul...
