Lantronix SecureLinx Quick Start Manual - page 3
WHAT’S IN THE BOX
In addition to the SLB, the box contains this Quick Start Guide, a documentation CD,
appropriate power inlet cord, and a starter kit of commonly used serial adapters and
cables. A variety of power cord types and additional adapters are available separately.
See the Lantronix website or product spec for accessory details.
Serial Adapters and Cables Included
Part Number
Description
200.2066A
Adapter: RJ45 to DB25M (DCE) for Sun with DB25 female
200.2067A
Adapter: RJ45 to DB25F (DCE) for Sun with DB25 male and some HP9000’s
200.2069A
Adapter: RJ45 to DB9M (DCE) for SGI Onyx
200.2070A Adapter: RJ45 to DB9F (DCE) for HP9000,SGI Origin,IBM RS6000,and PC- based Unix/Linux servers
ADP010104-01
Adapter: RJ45 Rolled serial, 0.1m (0.33 Ft.) for Cisco and Sun Netra
500-184-R
Cable: RJ45 to RJ45, Cat-5, .3m (1 Ft.)
200.0063
Cable: RJ45 to RJ45, Cat-5, 2m (6.6 Ft.)
500-153 Cable: RJ45
Loopback
Power Cords Included
Part Number
Description
SLPP12310-01
1
Inlet cord: IEC60320/C19 to NEMA 5-15P (15A), 8 Ft.
SLPP12810-01
2
Inlet cord: IEC60320/C19 to Schuko (EU), 8 Ft.
SLPP12910-01
2
Inlet cord: IEC60320/C19 to BS1363 (UK), 8 Ft.
SLPP12A08-01
2
Inlet cord: IEC60320/C19 to AS 3112 (AUS/NZ), 8 Ft.
1
Included with the 110V model.
2
Included with the 220V model.
(See www.lantronix.com for additional Inlet Power Cords available.)
Not Included – Available Separately
Part Number
Description
SLPP41107-01
Outlet cord set for the 220 VAC model: IEC60320/C13 to IEC60320/C14, pkg. of 4, 6 Ft.
500-137
Cable: RJ45 to RJ45, Rolled serial, 3m (9.8 Ft.)
56KMODEMCARD-02
Modem: PC card v.92, RoHS
200.2073
Adapter: RJ45 to DB25M (DCE) for external modems
SYSTEM OVERVIEW
The SecureLinx Branch Office Manager (SLB) enables system administrators to
securely manage remote servers and IT infrastructure equipment over the
Internet.This innovative device combines the capabilities of secure console
management, remote power management, and an Ethernet switch into a 1U rack-
mountable appliance.
The SLB is available in a 100-120 VAC output model (SLB088411-01) with
NEMA 5-15R type outlets, and a 208-240 VAC output model (SLB088412-01) with
IEC60320/C13 type outlets. Both models have (4) power outlets and allow power
management and control (on/off/reboot) for the attached equipment using a
simple web or command line interface.The SLB has (8) serial (RJ45) device ports
used for console management.The pin-outs for these ports are Sun/Cisco
compatible
(see diagram on page 6) so in most cases a simple “rolled” adapter
along with a standard Cat-5 cable can be used for the serial connection. See the
adapter/cable list on the next page to find the appropriate one for your equipment.
The SLB also has a built-in 8-port unmanaged Ethernet switch for convenience and
to help further reduce required rack space. Also two 10/100 Ethernet ports, a front
panel serial console port (RJ45), and two 32-bit CardBus (PC card) slots to support
storage cards or a PC Card modem for dial-in access.The list of supported cards is
available on the Lantronix website.
Typical IT equipment that would be managed by the SLB are:
• Servers • Switches • Routers • UPS systems • PBX systems • Telecom equipment
This Quick Start Guide explains the basics of how to connect and set up the SLB to
work on the network. For more detailed information, refer to the User Guide found
on the documentation CD or on the Lantronix website: www.lantronix.com.
Q u i c k S t a r t G u i d e
S L B B r a n c h O f f i c e M a n a g e r
2
W W W . L A N T R O N I X . C O M
3