Xport universal demo board user guide part number 900-563 revision b february 2013.
Copyright and trademark © 2013 lantronix. All rights reserved. No part of the contents of this book may be transmitted or reproduced in any form or by any means without the written permission of lantronix. Lantronix®, devicelinx® and xport® are registered trademarks of lantronix. Ethernet is a trade...
Contents copyright and trademark ............................................................................................. 2 contacts........................................................................................................................ 2 disclaimer and revisions ..................
1. Introduction about this guide this guide provides the information needed to use the xport and xport pro device servers with the universal demo kit. The intended audience is the engineers responsible for integrating the xport into their product. Notes: for evaluation of evolution os based turnkey ...
1: introduction additional documentation the following guides are available on the lantronix website ( www.Lantronix.Com ). Hardware related xport integration guide provides information for integrating the xport module on a customer platform. Xport pro integration guide provides information about th...
2. Demonstration kit using an xport sample and the xport demonstration kit, you can get familiar with the product and understand how to integrate the xport into a given product design. Contents of the kit the xport demonstration kit contains the following items: xport demo board 3.3v wall adaptor rs...
2: demonstration kit demo board block diagram the following drawing is a block diagram of the xport demo board showing the relationships of the components. Figure 2-1. Demo board block diagram serial interfaces the demo board has an rs-232 transceiver for connection to the xport internal uart. The t...
2: demonstration kit power supply the demo board uses an external 3.3v regulated supply (included with kit). General control the following tables denote the configuration of the demo board. Configuring the jumpers re-routes signals on the demo board to use as serial control signals, or to connect to...
2: demonstration kit configuration for modem control by default, on this demo board, the dcd and dsr signals are not routed to the xport module. This makes it necessary to jumper the pins in jp6 in order to route the signals to the desired cps on the xport module. To be specific, if you wanted to ro...
2: demonstration kit demo board schematics figure 2-3. Demo board schematics xport universal demo board user guide 10
2: demonstration kit figure 2-4. Rs-232 transceiver xport universal demo board user guide 11.
A: warranty for details on the lantronix warranty replacement policy, go to our web site at http://www.Lantronix.Com/support/warranty/index.Html. Xport universal demo board user guide 12.
