LCG LCG-2501WB User Manual - page 13
LEAD PACK 1(
LCG-2501WB)-User Manual
13
4) On the【USE】interface, pressing【YES】button means valid,【NO】means invalid.
5) Press the【ENTER】button to escape and save.
Illustrations: When pressing the【YES】button which means valid on the【USE】interface, the actual output value
of RED...WHITE is output in accordance with the percentage which the color cast calibration value divides 255.
6.6 CHANNEL MODE SETTING
1) Press the【ENTER】button in 【CHMD】menu, then enter to the channel mode setting.
2) Press the【UP/DOWN】button to select【11CH】,【8CH】,【6CH】,【5CH】
3) Press the【ENTER】button to escape and save.
6.7 DIMMING MODE SETTING
1) Press the【ENTER】button in【DIM】menu, then enter to the dimming mode setting.
2) Press the【UP/DOWN】button to select【LIN】,【SQR】,【ISQR】,【SCUR】,【LIN.】,【SQR.
】,【ISQR.】and【SCUR.】.
3) Press the【ENTER】button to escape and save.
Illustrations:When setting【LIN.】,【SQR.】,【ISQR.】and 【SCUR.】 in 【DIM】 menu, there will be
added a little delay dimming effect for smooth..
Dimming curve:
Linear curve: square law curve: Inverse Square law curve: S-curve:
6.8 AUTO LOCK KEY SETTING
1) Press the【ENTER】button in【LOCK】menu, then enter auto lock key setting.
2) Press the【UP/DOWN】button to select【YES】,【NO】
3) Press the【ENTER】button to escape and save.
Instructions:
When set to [YES], it will lock automatically after two minutes to prevent accidental triggering flood
flushing. When in the order press MENU->UP->DOWN->ENTER three times to unlock,and the time