LCG LCG-2501WB User Manual - Module
LEAD PACK 1(
LCG-2501WB)-User Manual
16
7.
Instruction for compatible Sweden DMX wireless
module
1. Four mode to choose from, as bellow ;
1) Green mode ; Sweden compatibility such as PR River PR-4500.
2) Blue mode ; Sweden transmit compatible.
3) Yellow mode ; Standard 2.4G compatible.
4) Red mode ; Custom signal compatible such as WI-DMX.
2 . Red and Yellow mode have sub colors to choose from as bellow ,;
1) RED---( Red / Green / Blue / Yellow / pale Blue / Pink )
2) Yellow---( Red / Green / Blue / Yellow / pale Blue / Pink and White )
3. Changing color mode into the menu ,;
1) Go to the SET section then WIRE. Two option into the WIRE section ( Reset and KEY ).
2) note,; Reset every time to change mode however the sub colors are available without
resetting
3) After reset use the Key and scroll with Enter to choose the colors. When selected press and
hold Enter one second to confirm.
4. Green is receiving Sweden compatible mode. To reset on this mode simply hold ENTER on KEY
menu for 3 seconds. This will delete the previous match when modifying install or transmitter. To
synchronize again, press the button on the transmitter for new match. The indicator of the transmitter
and fixture will flash at the same time. Control from DMX device gets active when the indicator
stops blinking.
5. Blue mode is for transmitting Sweden compatible. As all transmitting function of this wireless
module is not used, please ignore this function. Even when it’s set as master it can not use wireless
module to transmit DMX signals.
6. egg ,; Standard 2.4G China transmitter styx under RED will be compatible with the Lead Pak in
Yellow mode and sub RED. Same if the Standard 2.4 China transmitter sticks are set to Green, set
the Lead Pak into Yellow and sub Green. The WI-DMX will synchronize in the RED mode with the
RED sub frequency.