LCG LCG-2501WB User Manual - page 14
LEAD PACK 1(
LCG-2501WB)-User Manual
14
between two keys be press down must within 2 seconds.
6.9 CUSTOM COLOR SETTING
1) Press the 【ENTER】 button in 【CTST】 menu, then enter to the custom color setting.
2) Press the 【UP/DOWN】 select 【CT01】…【CT10】
3) Press the 【UP/DOWN】 select 【R】,【G】...【W】
4) Press the【UP/DOWN】button to select【1-255】numerical value.
5) Press the【ENTER】button to escape and save.
6.10
AUTO RUN, SELF-PROGRAM RUN
1)Press the【ENTER】button in【AUTO】menu, then enter to the auto run,self-program run.
2)Press the【UP/DOWN】button to select【AT01】…【AT05】,【AUTO SPEED】,【CHASE01】…【SOUND2
】
3)Press the【ENTER】button to start running.
6.11
EDIT SELF-PROGRAM
1) Press the【ENTER】button in【PROG】menu, then enter to the edit self-program.
2) Press the【UP/DOWN】button to select【CHASE01】…【CHASE03】
3) Press the【ENTER】button for confirmation and enter to the next menu.
4) Press the【UP/DOWN】button to select【SCENE01】…【SCENE20】
5) Press the【ENTER】button for confirmation and enter to the next menu.
6) Then press the【UP/DOWN】button to select【RED】…【SHUT】,【TIME】,【WAIT】,【USE】
7) Press the【UP/DOWN】button to set up the parameter which are needed.
8) Press the【ENTER】button t o escape and save.
Illustrations:When【USE】 is set to be【NO】,or the parameter of【TIME】 is 0, it will not run this scene.When
【WAIT】is set to be FADE time, the running process isas the following chart showing.
6.12
CHECK THE LIGHTING INFORMATION