Leadtek WinFast 6200MA User Manual - page 37
WinFast
®
6200MA User’s Manual
33
1 to 15 minutes. This means that you can have your hard disk drive to be turned off after a
selected number of minutes.
The choice: Disabled,1 Min,2,Min,3 Min,4 Min,5 Min,6Min,7Min,8 Min,9 Min,10Min,
11Min,12 Min,13 Min,14 Min,15 Min
Doze Mode
After the selected period of system inactivity, the CPU clock runs at slower speed while all other
devices still operate at full speed.
The choice: Disabled,1 Min,2,Min,4 Min,8 Min,12 Min,20 Min,30 Min,40 Min,1 Hour.
Standby Mode
After the selected period of system inactivity, the fixed disk drive and the video shut off while all
other devices still operate at full speed.
The choice: Disabled,1 Min,2,Min,4 Min,8 Min,12 Min,20 Min,30 Min,40 Min,1 Hour.
Suspend Mode
After the selected period of system inactivity, all devices except the CPU shut off.
The choice: Disabled,1 Min,2,Min,4 Min,8 Min,12 Min,20 Min,30 Min,40 Min,1 Hour.
** PM Events **
You may disable activity monitoring of some common I/O events and interrupt requests so they
do not wake up the system. The default wake-up event is keyboard activity. When On (or named,
in the case of LPT & COM), any activity from one of the listed system peripheral devices or
IRQs wakes up the system.
A power-management (PM) event awakens the system from, or resets activity timers for,
Suspend mode. You can disable monitoring of common interrupt requests so they do not
generate PM events.
HDD Ports Activity
COM Ports Activity
LPT Ports Activity
VGA Activity
IRQ [3-7, 9-15], NMI
IRQ 8 Break Suspend
You can Enable or Disable monitoring of IRQ8 (the Real Time Clock) so it does not awaken the
system from Suspend mode.
Power Button Over Ride
When you select Enabled, pressing the power button for more than 4 seconds forces the system
to enter the Soft-Off state when the system has "hung.
Ring Power Up Control
An input signal on serial Ring Indicator (RI) (in other words, an incoming call on the modem)
will power up the system.
KB Power ON Password