Leadtek WinFast 6200MA User Manual - page 49
WinFast
®
6200MA User’s Manual
45
5-1-5
WinFast Information
5-2
Installing Display Driver for Windows NT 4.0
5-2-1
Install Windows NT 4.0 with the SiS620 onboard
Install Windows NT 4.0 in the usual way. When the installation is completed Windows NT 4.0
will be booted on the VGA mode as it did not recognize the SiS530 during installation.
NOTE:
Before installing the Windows NT 4.0 driver, be sure the
Windows NT 4.0 version number is Windows NT 4.00.1381or
later. If your system is an older version, we recommend you
upgrade it to the latest version.
5-2-2
Install Display Driver for Windows NT 4.0
Step 1
Reboot the system and select “Windows NT 4.0 (VGA)” from the Boot Menu
List.
Step 2
Insert the “WinFast Mainboard & SCSI Software Pack CD” into the CD-ROM
drive. From your Windows NT 4.0 desktop wallpaper area, click mouse “right”
button and select the “Properties” option. (or double click “display” icon in
control panel)
Step 3
From the “Display Properties” window, select the “Display Type” button where a
window of “Display Type” appears on your screen.