Leaf AFi Quick Start Manual - page 126
Other manuals for AFi:
User Manual
of
128
62
Chapter 4 – Power Supply
Charging the Batteries
You can charge the lithium ion battery used with the AFi back using the
MCL103 battery charger provided.
Charging the Battery Using the Hähnel MCL103
Important: Before performing these procedures, refer to the Safety Precautions
at the beginning of this guide.
To charge the battery with the 12V DC Power Supply:
1.
Connect one end of the 12V DC power supply cable to the hähnel
MCL103 battery charger.
2.
Connect the 12V DC power supply to a wall outlet, using the cable
provided.
Note: The 12V DC power supply is designed for use with both 110V and
220V input voltages.
Important: Do not use any power supply cables other than the cable
provided.
Figure 4: Connecting the hähnel MCL103 battery charger