Leaf AFi Quick Start Manual - •
30
Chapter 2 – Getting Started
Selecting the Exposure Mode
Figure 19: AE Switch
¾
Move the
AE
switch to select the desired exposure mode:
P
—
Programmed auto exposure
: The optimal aperture and shutter
combination is automatically selected by the camera system. If you
change the shutter time or the aperture setting, the other value is
automatically adjusted.
S
—
Shutter priority exposure control
: In this mode you set the
shutter speed using the rear dial; the camera automatically shuts the
aperture.
A
—
Aperture priority exposure control
: In this mode you set the
aperture using the front dial; the camera automatically selects the
shutter speed.
M
—
Manual setting of exposure control
: In this mode you can set
the aperture using the front dial and the shutter speed using the
rear dial. On a non-AFD lens, you can set the aperture by using the
aperture ring of the lens and the shutter speed using the rear dial.
Red dot—use to set the auto-exposure settings:
a.
Push and hold down the
AE
button.
b.
Set the rear dial to one of the following:
•
Manual
•
Aperture priority
•
Shutter priority
•
Program
•
Bulb
•
Time