Leaf AFi Quick Start Manual - page 90
26
Chapter 2 – Getting Started
Camera Controls
Turning Your Camera System On and Off
Before you turn on your digital camera system, make sure that you have
inserted a charged battery.
1.
Turn the
On/Off
dial to single shot or continuous mode.
Figure 18: On/Off Dial
2.
Briefly push the shutter release button.
The display on the AFi camera body and back turn on, and the camera
system is ready for use.
Note: The camera system will enter sleep mode if it is not used for three
minutes. You can set the sleep mode in the camera menu.
To turn the camera off:
¾
Turn the shutter release dial to
OFF
.
Selecting the Shutter Release Mode
¾
Using the On/Off dial (Figure 18), select the desired shutter release
mode:
Single shot: takes a single shot when you push the shutter release
button
Continuous: the camera shoots continually until you release the
shutter release button