LEEDS WORLD PTZPRO 12 User Manual - Dome : Tour
28
OPERATION & PROGRAMMING
DOME : TOUR
The dome system has 8 guard tours. Each of the tour has 30 items.
Each item can have pre-defined preset, pattern, scan and any other tour.
To program a tour.
1. Press the MENU key (refer to ‘Accessing main menu’).
2. Select DOME and select TOUR using the joystick.
3. Use the joystick to position the cursor beside NO.xxx.
Move left or right to select tour ID. Press the [TELE]button
or turn the joystick clockwise to setup.
4. To insert items, Use following steps :
a. To save the preset.
- Move the joystick to position the cursor beside XXX.
- Press the [TELE] button or twist the joystick clockwise to
select the preset number.
b. To save the Scan or Pattern,
- Move the joystick to position the cursor beside XXX.
- Please press the [NEAR] or [FAR button] on the keyboard.
You can select Scan or Pattern.
5. Follow the directions displayed on the monitor.
6. Before select a specific item, save it first.
To disable or clear a tour.
1. Use the joystick to position the cursor beside NO.xxx.
Move left or right to select tour ID.
2. Press the [WIDE] button or turn the joystick counterclockwise to clear.
DOME : PATTERN
A pattern is a memorized, repeating, series of pan, tilt, zoom
and preset functions that can be called with a command from
a controller or automatically by a programmed function.
The dome system can have maximum 8 user-defined patterns.
To program a Pattern :
1. Press the MENU key (refer to ‘Accessing main menu’).
2. Select DOME and select PATTERN using the joystick.
3. Use the joystick to position the cursor NO.xxx.
Move left or right to select pattern ID.
4. Press the [TELE] button or turn the joystick clockwise to start to learn.
5. Follow the directions displayed on the monitor.
6. To finish learning, press [ENT] or [CLOSE] key.
To cancel learning, press [CLR] or [CLOSE] key.
7. Edit title. Refer to [TITLE DEIT] section in this manual.
To clear a pattern :
1. Use the joystick to position the cursor beside NO.xxx. Move the
Joystick left or right to select a pattern ID.
2. Press the [WIDE] key or turn the joystick counterclockwise
>>>>
██████████████████████████
SYSTEM >
DISPLAY > GENERAL
►DOME > MOTION
CAMERA > HOME
ALARM
PRESET
EXIT
TOUR
►PATTERN
SCAN
>
██████████████████████████
►NO.001 :
█• • • • • • •
TITLE
:
-TIME
:
██████████████████████████
Press
Press
>>>>
██████████████████████████
SYSTEM >
DISPLAY > GENERAL
►DOME > MOTION
CAMERA > HOME
ALARM
PRESET
EXIT
►TOUR
PATTERN
SCAN
>
██████████████████████████
►NO.001
: Saved
=== === === === === ===
=== === === === === ===
=== === === === === ===
=== === === === === ===
=== === === === === ===
██████████████████████████
* Change ID:
* Change Action: