Logic L60CHDB10 Instruction & Installation Manual - page 10
10
Fitting and Replacing the Carbon Filter
• It is necessary to install 2 carbon filters to your product.
• To attach the carbon filter, place your filter on the connection channels on the motor and turn the left hand
filter clockwise and the right hand filter anti-clockwise.
• In order to remove filters, turn the left hand filter anti-clockwise and the right hand filter clockwise.
Changing the Lamps
1. Disconnect the electricity supply.
2. Remove the aluminium grease filter.
3. Replace with a 25W 240V SES (E14) candle lamp in
each holder.
• Replace the carbon filters when they no longer absorb kitchen odours effectively. They should,
however, be replaced at least every 6 months to prevent a risk of fire.
• Used carbon filters can be disposed of with the normal household waste.