Logic L60CHDB10 Instruction & Installation Manual - Control Panel
6
The cooker hood works with
1. Air Extraction
The air is drawn in and cleaned by the grease filters and directed outside.
The non-return flap supplied with the appliance must be fitted on the exhaust socket of
the motor unit.
Having a non-return flap fitted in the ducting ensures that air, once ducted to the
outside, cannot get back into the room again.
The flap is closed when the cooker hood is switched off.
When the cooker hood is switched on, the non-return flap opens for the cooking vapours
to be ducted away.
2. Air Recirculation
The air is drawn in and cleaned first by the grease filters and then by a carbon filter. The
cleaned air is then recirculated back into the kitchen through the recirculation vents in
the top of the cooker hood chimney.
Control Panel
1. Lamp Switch
2. Motor Speed Selector
1
2
Modes of Operation
There must be adequate ventilation of the room when the cooker hood
is used at the same time as appliances burning gas or other fuels.
• Carbon filters are available as an optional extra.
• Before using the cooker hood in recirculation mode, ensure that the
carbon filters are in place. See “Cleaning and Maintenance”.