Logic L60CHDB10 Instruction & Installation Manual - Hints And Tips

11

  Hints and Tips

Problem

Solution

Cooker hood does not operate

•  Check Electric connection.  

(The supply voltage should be 220-240 V. The cooker hood 

must be connected to an earthed socket.)

•  Check motor speed selector. 

(Motor speed selector should be in position 1,2, or 3.)

Lamp does not light

•  Check Electric connection.  

(The supply voltage should be 220-240 V. The cooker hood 

must be connected to an earthed socket.)

•  Check lamp switch. 

(Lamp switch should be in the on position.)

•  Check lamps have not blown.

Air suction of cooker hood is weak

•  Check aluminium filter. 

(Aluminium grease filter should be washed once a month under 

normal conditions.)

•  Check air outlet chimney. 

(Air outlet chimney should be open.)

•  Check carbon filter. 

(If operating with carbon filters, the carbon filters should be 

replaced every 3 months.)

If Cooker hood Does Not Operate

Be sure that the plug is connected to the socket and the fuse in the installation is in good condition, check your 

cooker hood according to the above table. If the problem continues, contact an authorised service agent.