Main Resource Impact 8024S User Manual - page 11
Courtesy of Main Resource, Inc. Visit us at
www.MainResource.com
or call 800 362-6740 for all your
telecom needs.
Page 11 of 16
1. Press OPTIONS
2. MUSIC
3. ON
4. SPEAKER to end.
5. Adjust the volume with the speaker volume control.
6. To cancel, press OPTIONS, MUSIC, OFF and SPEAKER.
Toll Restriction Override –
Toll Restriction Override (TRO) replaces the restrictions of the station you are using with the
restrictions of your home station. To use:
1. Press INTERCOM
2. Dial “**6”
3. Dial your extension number
4. Dial your TRO code and dial.
5. To clear the code, press INTERCOM and dial “**6” and press SPEAKER.
Tracker Paging System -
If enabled on your system, the Tracker Paging System allows you to send alpha/numeric or
numeric-only messages (depending on the model in use) to extensions on your system. You can
also park calls in orbit for the paged party to retrieve. If Tracker Pager is available on your station,
you must enable it before use. When you do not wish to receive messages and when you leave for
the day, it is suggested that you disable Tracker Paging at your station.
To use, press INTERCOM and dial “*06”. To disable, press INTERCOM and dial “#06”.
Send a Call Back Message to a Station’s Tracker Pager after Receiving a Ring-No Answer
Response –
Dial “#01” or the preprogrammed TRACK button. When your station returns to idle, hang up or
press SPEAKER to end. Your extension number (and station name on some models) will be
displayed on the called party’s Tracker Pager display.
Send a Call Back Message to a Station’s Tracker Pager Without Calling Them First:
1. Press INTERCOM
2. Dial “#01”
3. Dial the extension number and hang up or press SPEAKER to end. Your extension number
(and station name on some models) will be displayed on the called party’s Tracker Pager
display.
Send a Message to a Station’s Tracker Pager to Retrieve a Parked Call:
1. Answer the call and press TRNS/CNF
2. Enter the extension number
3. Dial “#01” or press the TRACK button
4. Hang up or press SPEAKER to end. The Pager Tracker system sends the orbit dialing code
and available caller I.D. information to the display.
Respond When Your Tracker Pager Displays a Park Orbit Dialing Code –
Press INTERCOM from any extension, dial the orbit number to retrieve the call.