Main Resource Impact 8024S User Manual - page 9
Courtesy of Main Resource, Inc. Visit us at
www.MainResource.com
or call 800 362-6740 for all your
telecom needs.
Page 9 of 16
If enabled, this feature allows a user to monitor a call in progress. You can also make a SOHVA
call to a station, allowing you to assist the station user on a call. For this option, the called station
must be “observable” as set up in programming and your telephone needs to have a pre-
programmed SOHVA button.
To Use Call Monitoring on a Call In Progress:
1. Press INTERCOM
2. Dial “#03”
3. Dial the extension number of the phone to be monitored
4. Press SPEAKER to end.
To Use SOHVA on a Call Being Monitored –
Press the pre-programmed SOHVA button and speak. The external caller will not hear your
announcement. If the station you are observing is in using speakerphone mode, you may not be
able to use SOHVA calling.
Mute –
Press MUTE. Press MUTE again to cancel.
Do-Not-Disturb Mode –
When you leave your station for an extended period of time and want another extension to handle
your calls, use off-duty or do-not-disturb mode. To use:
1. Press OPTIONS
2. Press NEXT
3. Press DND
4. Press ON
5. Press SPEAKER.
To cancel, follow the first 3 of the preceding steps, then press OFF and SPEAKER. When a call
comes through to your phone while Do-Not-Disturb mode is on, the INTERCOM light will flash and
the station attempting to call will be displayed in on the LCD. Pick up the call if desired. If you do
answer, when you hang up the call, you will be in Do-Not-Disturb mode until you cancel it.
Wrap-Up Mode –
Wrap-Up Mode is useful when you need time to complete paperwork after making a call and would
like to have another extension receive your calls. To Use, Press HOLD and then the pre-
programmed DND feature button (see programming instructions). To return to normal mode,
repeat.
Paging -
For Systems Equipped with an external paging unit:
1. Lift the handset
2. Press INTERCOM
3. Dial the extension number of the station programmed for paging (see programming
information) or press a preprogrammed paging button, or dial INTERCOM 89 for the special
paging port
4. Make your announcement and hang up.