1 english ( o rigina l in st ruct ions) instruction manual important: read before using. Cordless jig saw bjv140 bjv180 007481.
2 english (original instructions) specifications model bjv140 bjv180 length of stroke 26 mm 26 mm wood 135 mm 135 mm mild steel 10 mm 10 mm max. Cutting capacities aluminum 20 mm 20 mm strokes per minute (min -1 ) 0 - 2,600 0 - 2,600 overall length 255 mm 257 mm net weight 2.8 kg 2.9 kg rated voltag...
3 warning: • the vibration emission during actual use of the power tool can differ from the declared emission value depending on the ways in which the tool is used. • be sure to identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of u...
4 will reduce personal injuries. 12. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on ...
5 6. Check for the proper clearance beyond the workpiece before cutting so that the blade will not strike the floor, workbench, etc. 7. Hold the tool firmly. 8. Make sure the blade is not contacting the workpiece before the switch is turned on. 9. Keep hands away from moving parts. 10. Do not leave ...
6 functional description caution: • always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking function on the tool. Installing or removing battery cartridge 1 2 3 007482 • always switch off the tool before insertion or removal of the battery cartr...
7 lighting up the lamps caution: • do not look in the light or see the source of light directly. To turn on the lamp, pull the trigger. Release the trigger to turn it off. Note: • use a dry cloth to wipe the dirt off the lens of lamp. Be careful not to scratch the lens of lamp, or it may lower the i...
8 cover plate 1 2 007503 use the cover plate when cutting decorative veneers, plastics, etc. It protects sensitive or delicate surfaces from damage. Fit it on the back of the tool base. Anti-splintering device 1 2 007504 for splinter-free cuts, the anti-splintering device can be used. To install the...
9 bevel cutting 007488 caution: • always be sure that the tool is switched off and the battery cartridge is removed before tilting the base. With the base tilted, you can make bevel cuts at any angle between 0° and 45° (left or right). Loosen the bolt on the back of the base with the hex wrench. Mov...
10 to trim edges or make dimensional adjustments, run the blade lightly along the cut edges. Metal cutting always use a suitable coolant (cutting oil) when cutting metal. Failure to do so will cause significant blade wear. The underside of the workpiece can be greased instead of using a coolant. Rip...
11 3 2 1 007502 caution: • always use blades no. B-8, b-13, b-16, b-17 or 58 when using the guide rail and the guide rail adapter. Maintenance caution: • always be sure that the tool is switched off and the battery cartridge is removed before attempting to perform inspection or maintenance. • never ...
12 makita corporation anjo, aichi, japan www.Makita.Com 884686c222.
