Makita BJV140 Instruction Manual - Specifications
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model BJV140
BJV180
Length of stroke
26 mm
26 mm
Wood 135
mm 135
mm
Mild steel
10 mm
10 mm
Max. cutting capacities
Aluminum
20 mm
20 mm
Strokes per minute (min
-1
)
0 - 2,600
0 - 2,600
Overall length
255 mm
257 mm
Net weight
2.8 kg
2.9 kg
Rated voltage
D.C. 14.4 V
D.C. 18 V
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
END004-4
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
・ Read instruction manual.
・ Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and waste
batteries and accumulators and their
implementation in accordance with
national laws, electric equipment and
battery pack that have reached the end
of their life must be collected separately
and returned to an environmentally
compatible recycling facility.
ENE019-1
Intended use
The tool is intended for the sawing of wood, plastic and
metal materials. As a result of the extensive accessory
and saw blade program, the tool can be used for many
purposes and is very well suited for curved or circular
cuts.
ENG905-1
Noise
The typical A-weighted noise level determined according
to EN60745:
Model BJV140
Sound pressure level (L
pA
) : 78 dB(A)
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
Model BJV180
Sound pressure level (L
pA
) : 84 dB(A)
Sound power level (L
WA
) : 95 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Model BJV140
Work mode : cutting boards
Vibration emission (a
h,CW
) : 5.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode : cutting sheet metal
Vibration emission (a
h,CM
) : 3.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
Model BJV180
Work mode : cutting boards
Vibration emission (a
h,CW
) : 8.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode : cutting sheet metal
Vibration emission (a
h,CM
) : 3.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
ENG901-1
•
The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
•
The declared vibration emission value may also be
used in a preliminary assessment of exposure.
Cd
Ni-MH
Li-ion