Makita BTS130 Instruction Manual - Specifications
4
ENGLISH
Explanation of general view
SPECIFICATIONS
• Due to our continuing programme of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
END004-4
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
..... Read instruction manual.
ENE033-1
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
GEA006-2
General Power Tool Safety
Warnings
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause you
to lose control.
Electrical safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
6. Do not expose power tools to rain or wet
conditions. Water entering a power tool will increase
the risk of electric shock.
7. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
1.
Battery cartridge
2.
Button
3.
Red indicator
4.
Star marking
5.
Switch trigger
6.
Lamp
7.
Reversing switch lever
8.
Bit
9.
Sleeve
10. Bit-piece
11. Screw
12. Hook
13. Groove
14. Air vents
15. Cooling down oil unit
16. Limit mark
17. Rear cover
18. Spring
19. Arm
20. Recessed part
21. Carbon brush cap
22. Hole
Model
BTS130
Capacities
Machine screw
M4 - M8
Standard bolt
M6 - M10
High tensile bolt
M6 - M8
No load speed (min
-1
)
0 - 2,400
Impacts per minute (min
-1
)
0 - 1,600
Overall length
183 mm
Net weight
1.7 kg
Rated voltage
D.C.14.4 V