Makita BUC121 Instruction Manual - Specifications
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model BUC121
BUC122
Chain speed per minute (min
-1
)
4.8 m/s (290 m/min)
5.0 m/s (300 m/min)
Length of guide bar
115 mm
Type 25
AP
Pitch 1/4"
Saw chain
No. of drive links
42
Overall length
422 mm
422 mm
Net weight
2.5 kg
2.6 kg
Rated voltage
D.C. 14.4 V
D.C. 18 V
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
END015-2
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
・ Read instruction manual.
・ Wear eye protection.
・ Wear ear protection.
・ Wear a helmet, goggles and ear
protection.
・ Use appropriate protection for foot-leg
and hand-arm.
・ Do not expose to rain.
・ Hold the saw with both hands while
working! One-handed use is extremely
hazardous!
・ This saw is to be used by properly
trained operators only.
・ Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of European Directive
2012/19/EU on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and waste
batteries and accumulators and their
implementation in accordance with
national laws, electric equipment and
battery pack that have reached the end
of their life must be collected separately
and returned to an environmentally
compatible recycling facility.
ENE031-2
Intended use
The tool is intended for cutting branches.
GEA006-2
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1.
Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2.
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3.
Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical safety
4.
Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5.
Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
Cd
Ni-MH
Li-ion