1 engl ish instruction manual warning: for your personal safety, read and understand before using. Save these instructions for future reference. Cordless chain saw uc120d 004709.
2 english specifications model uc120d chain speed per minute (min -1 ) 160 m/min. Length of guide bar 115 mm type 25 ap pitch 1/4" saw chain no. Of drive links 42 overall length 468 mm net weight 2.2 kg rated voltage d.C. 12 v • due to our continuing programme of research and development, the specif...
3 director responsible manufacturer: makita corporation 3-11-8, sumiyoshi-cho, anjo, aichi, japan authorized representative in europe: makita international europe ltd. Michigan drive, tongwell, milton keynes, bucks mk15 8jd, england gea006-2 general power tool safety warnings warning read all safety...
4 20. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. 21. Maintain power tools. Check for misalignment or binding of moving parts, b...
5 10. Keep handles dry, clean, and free from oil and grease. Greasy, oily handles are slippery causing loss of control. 11. Cut wood only. Do not use chain saw for purposes not intended. For example: do not use chain saw for cutting plastic, masonry or non-wood building materials. Use of the chain s...
6 save these instructions. Tips for maintaining maximum battery life 1. Charge the battery cartridge before completely discharged. Always stop tool operation and charge the battery cartridge when you notice less tool power. 2. Never recharge a fully charged battery cartridge. Overcharging shortens t...
7 loosen the hex socket head bolt with the hex wrench provided. Remove the guide bar. 2 3 1 001733 fit the saw chain over the guide bar. Notice that the cutters must be facing the revolving (arrow) direction. 1 2 001734 fit the saw chain over the sprocket. Install the guide bar so that its concave p...
8 pruning trees 1 001739 1 001740 caution: • keep all parts of the body away from the saw chain when the motor is operating. • hold the chain saw firmly with both hands when the motor is running. • do not overreach. Keep proper footing and balance at all times. Bring the tip guide/lower guide into c...
9 • please have your saw chain sharpened at a makita authorized service center or replace with a new one if your saw chain does not cut correctly. Cleaning guide bar 2 1 001750 chips and sawdust will build up in the guide bar groove, clogging it and impairing oil flow. Always clean out the chips and...
10
11.
12 makita corporation anjo, aichi, japan 884109e220
