Makita UC120D Instruction Manual - Accessories
9
•
Please have your saw chain sharpened at a Makita
Authorized Service Center or replace with a new
one if your saw chain does not cut correctly.
Cleaning guide bar
2
1
001750
Chips and sawdust will build up in the guide bar groove,
clogging it and impairing oil flow. Always clean out the
chips and sawdust when sharpening or replacing the
saw chain.
Storing tool
Clean the tool before storing. Remove any chips and
sawdust from the tool after removing the chain cover.
After cleaning the tool, run it under no load. Then
remove the battery cartridge from the tool and lubricate
the saw chain and guide bar.
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized Service Centers,
always using Makita replacement parts.
ACCESSORIES
CAUTION:
•
These accessories or attachments are
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
•
Various type of Makita genuine batteries and
chargers
•
Saw chain
•
Scabbard
•
Guide bar complete
•
File
•
Hex wrench
•
Chain oil
1. Guide bar
2. Screwdriver