Meec Tools 000-138 Operating Instructions Manual - Technical Data
EN
52
TECHNICAL DATA
Rated voltage
230 V ~ 50 Hz
Output
850 W
Safety class
II
Speed, no load
0–2900 rpm
Drill chuck
Ø 2–13 mm
Drill capacity
Wood: 25 mm
Metal: 10 mm
Masonry: 13 mm
Dimensions
300 x 80 x 230 mm
Weight
2.2 kg
Sound pressure level, LpA
92 dB(A), K=3 dB
Sound power level, LwA
103 dB(A), K=3 dB
Vibration
Drilling in metal – Main handle: 6.228 m/s², K=1.5 m/s²
Support handle: 5.017 m/s², K=1.5 m/s²
Percussion drilling in concrete – Main handle: 15.163 m/s², K=1.5 m/s²
Support handle: 9.601 m/s², K=1.5 m/s²
Always wear ear protection.
The declared vibration value, which has been measured by a standardised test method, can be used
to compare different tools with each other and for a preliminary assessment of exposure.
WARNING: The actual vibration level when using power tools may differ from the specified maximum
value, depending on how the tool is used. It is therefore necessary to determine which safety
precautions are required to protect the user, based on an estimate of exposure in actual operating
conditions (taking into account all stages of the work cycle, e.g. the time when the tool is switched off
and when it is idling, in addition to the start-up time).