Semi-recessed headwall (floor mount) installation manual.
2 overview form® is a ul-listed configurable headwall system. This system includes multiple horizontal equipment channels integrated into the fascia of the unit which provide mounting points for a variety of accessories. Included in the system are medical gas and electrical services, as well as prov...
3 detail a a figure 1. Legs of studs and header face away from rough opening 1 . Install adjustable base into rough opening. After the base is positioned as shown in figure 2, secure it to the floor with anchors (provided by others) in at least two places. If the floor is excessively wavy, be sure t...
4 2. Install frame section 1. Secure frame section 1 to the base with the screws provided. Next, secure frame section to king stud of rough opening via the attached mounting brackets on the side of the frame. D c detail d detail c figure 3. 3. Install frame section 2. Section 2 attaches to section 1...
5 figure 5. 4. Repeat the previous process (figure 4) to install sections 3 and 4 (figure 5). Medical gas connections medical gas outlets are pre-manifolded and terminated near the top of each section, or as indicated on the approved drawings. 1. Use extreme care in making medical gas service connec...
6 figure 7. Detail f f panel hanger brackets 2. Install panels, starting at the bottom. The panels must be placed against the studs and moved downward so that the panel hangers engage properly. Make sure panel seams are aligned with one another and outside perimeter panel edges are flush before proc...
7 g detail g 3. Next, locate horizontal channel assemblies with end caps on each end. Figure 8 shows a side-view detail of how the channel should be oriented within the frame. Simply rock the channel back in place making sure to line up the mounting holes from the channel to the frame. G detail g fi...
8 5. Install the gcx track assemblies using the #12 screws provided (figure 10). Detail h h figure 10. 6. Install cover plates, sconce lights and miscellaneous devices/accessories (provided per customer requirements; may or may not be present on all models) to panels that were field installed. Figur...
9 installation terms and conditions each modular services unit, or unit section, shall be completely pre-wired for normal, emergency and low voltage according to the approved submittal. Communication devices and wiring shall be supplied by others. These devices include nurse call, television, code b...
