Modular FORM Installation Manual - page 7
Manual is about: SEMI-RECESSED HEADWALL (floor mount), UL-listed configurable headwall system
of
9
7
G
DETAIL G
3. Next, locate Horizontal Channel assemblies with end caps on each end. Figure 8 shows a side-view detail of
how the channel should be oriented within the frame. Simply rock the channel back in place making sure to
line up the mounting holes from the channel to the frame.
G
DETAIL G
Figure 8.
Figure 9.
4. Fix the horizontal channel in place using the #10 x 1" long self-tapping screws in each hole. To cover up the
screws, install the screw cap by inserting one end into the track and running your finger along its length until
it clicks in place. Figure 9 shows how the channel should appear after install.
Rock Extrusion in Place,
Align Mounting Holes