Moffat TURBOFAN E31D4 Installation And Operation Manual - page 11
Operation
9
Cooking in Program Mode
1.
TURN ‘ON’.
Press ‘On-Off’ button.
Press ‘Programs’ button.
Temperature Dislay.
Temperature Display will
show program selected.
2.
SELECT A PROGRAM
.
+ to scroll forward through programs.
- to scroll backward through programs.
Time Display.
Time Display will show ‘Pre-Heating’.
Program cannot be started until
pre-heating is completed.
Load Oven.
‘Time’ display will show
‘Ready’.
3.
START PROGRAM.
Press ‘Start / Stop’ button to start
cooking program.
- Press any button, to cancel the ‘Alarm’
.
- Press ‘Grill / Broil’ button, to select the Grill / Broil mode.
- Press ‘Act Temp’ button, to check ‘Actual’ temperature of oven at any time during cooking.
- Press ‘Program’ button, to program the Oven refer to ‘Setting the Oven Programs’ overleaf
.
- Press and hold ‘On / Off’ button, for 3 seconds to turn ‘Off’ the Oven
.
To check actual oven temperature
during preheat or cooking, press
‘Temperature’ button. Actual
temperature will display briefly on
‘Temperature Display’ before the
display reverts to the pre-set
temperature.
Opening the oven door during a
cooking cycle will pause the
cooking time. To continue
cooking, close the oven door.
Heating ‘On’
Indicator
When cooking in ‘Program’ mode,
the oven light will remain ‘On’ until
cooking is completed.
Program Mode
Indicator
Grill / Broil; - Grill / Broil function can be selected at any time during the Program Mode by pressing the ‘Grill / Broil’ button.
The ‘Grill / Broil’ LED will illuminate.
The Time Display will show either ‘Grill’ or ‘Broil’ .
On completion of the Grill / Broil mode, the oven temperature will return to the temperature previously set.