Moffat TURBOFAN E31D4 Installation And Operation Manual - page 12

Operation 

10 

Setting the Oven Programs 

Oven can be pre-programmed with up to 20 Program’s.  When you receive your oven, the controller is not programmed.  To 

set programs, carry out the following for each program required:- 

1. 

ENTER PROGRAMMING MODE.

Press ‘Programs’ button to enter 

‘Programming’ mode. 

2. 

SELECT PROGRAM REQUIRED

.

Rotate ‘Temperature Control’ to program 

required. 

Temperature Display will show program 

selected. 

Press and hold ‘Temperature’ button 

until ‘Time’ and ‘Temperature’ displays 

and ‘Temperature’ button LED flashes. 

Change time and temperature  

parameters. 

3. 

ENTER COOK TEMPERATURE

.

Rotate ‘Temperature Control’ to set 

cook temperature. 

 + to increase the temperature. 

 - to decrease the temperature. 

‘Temperature’ Display will show  

temperature selected.

4. 

ENTER COOK TIME

.

Rotate ‘Timer Control’ to set cook time. 

+ to increase the time. 

- to decrease the time. 

‘Time’ Display will show time 

selected.

‘Time’ and ‘Temperature’ displays 

and ‘Temperature’ button LED flash. 

Press ‘Temperature’ button to con-

firm ‘Time’ and ‘Temperature’ set-

tings. 

Heating ‘On’  

Indicator 

Timer ‘On’  

Indicator