NAD T535 Owner's Manual - page 19
HDMI SETUP MENU
ABOUT HDMI
HDMI (High Definition Multimedia Interface) supports both video and
audio on a single digital connection for use with DVD Players, Set-Top Boxes
and other AV devices.
HDMI was developed to provide the technologies of HDCP (High Definition
Contents Protection). HDCP is used to protect digital content transmitted
and received.
HDMI has the capability to support standard, enhanced or high-definition
video plus standard to multi-channel surround-sound audio, HDMI features
include uncompressed digital video, a bandwidth of up to 5 gigabytes per
second, one connector (instead of several cables and connectors), and
communication between the AV source and AV devices such as DTVs.
HDMI VIDEO
The resolution of your HDMI video can be adjusted with T 535 connected to
an HDMI-compatible component via the HDMI jack.
480P/576P, 720P, 1080i and 1080P : Set applicable resolution
depending on your TV/Monitor capability.
Auto : The best resolution is automatically selected based on your
TV/monitor’s capability.
NOTES
• When[TVType]issetto[NTSC]or[PAL],videooutputsignalswillbe
480Por576Paccordingly.
• ComponentvideooutismutedatHDMION.
• Forsettingsotherthan[Auto],besurethattheselectedresolution
issupportedbytheHDMI-compatiblemonitoryouareusing.Ifthe
selectedresolutionisnotsupported,thissettingisautomatically
switchedtothemostappropriateresolution.
• Picturequalitymaydecreasewhen[1080P]isselectedandanHDMI
cablelongerthan5misused.
WIDE SCREEN FORMAT
The aspect ratio of the projected images on the screen can be adjusted
through the following options.
Zoom : Display 4:3 image on a 16:9 screen with the center portion of
the screen enlarged. (The top, bottom, left and right portions of the
screen are cut off.)
NL Stretch : Display 4:3 image on a 16:9 screen with non-linear
stretching. (The center position of the screen is stretched less than the
side.)
Pillar Box : Display 4:3 image on a 16:9 screen without stretching.
Off : No aspect ratio adjustment.
NOTE
ThisfunctionisonlyavailableforprogressivescanandHDMIoutput.
DVI OUTPUT
The DVI output range can be set to match the connected component.
Standard : Select if you cannot see the correct image when you select
[Enhanced].
Enhanced : Select if black and white in the image is not distinct.
NOTE
ThisfunctionisonlyavailablewhenconnectedtoaDVI-D-compatible
componentviatheHDMIjack.
HDMI AUDIO
HDMI audio output can be set to match the connected component.
Auto : Best audio setting is automatically selected based on the
connected component.
PCM : Audio output is the decoded multi-channel or 2ch linear PCM
audio signals.
Off : Turn off HDMI audio output.
NOTES
• ThisfunctionisonlyavailablewhenconnectedtoanHDMI-compatible
componentviatheHDMIjack.
• SACDsignalisnotavailableatHDMIout.
• Digitaloutputsignalsaremutedwhen[HDMIAudio]issetto[Auto]or
[PCM].
OPERATION
USING THE T 535 – HDMI SETUP MENU
19
ENGLISH
FR
ANÇ
AIS
ESP
AÑOL
IT
ALIANO
DEUT
SCH
NEDERL
ANDS
SVENSK
A
РУ
ССКИЙ