NEC Aspire Quick Reference Manual
Placing an Outside Call . . .
1. Press .
•
Listen for dial tone.
•
To preview the number first, press
after step 2 instead of pressing
it first.
2.
+ Outside number.
•
When behind a PBX, you may have to
dial another 9 before your number.
OR
2.
+ Line group number
(1-9 or 001-200) + Outside number.
•
When behind a PBX, you may have to
dial 9 before your number.
OR
2.
+ Line number (e.g., 005 for
line 5) + Outside number.
•
When behind a PBX, you may have to
dial 9 before your number.
Calling a Co-Worker, Voice Mail and Paging . . .
1. Press .
2. Dial co-worker’s extension number.
•
Your call will ring or voice-announce.
If you hear ringing, wait for an
answer. If you hear two beeps, begin
speaking. Dialing 1 changes mode.
OR
2. For Paging, dial
+ 0 for All Call
or 1-64 for zones.
OR
2. To call your mailbox, dial the *8.
Dial using the
Intercom:
Dial codes for outside
lines:
Using Your DECT Wireless Telephone
Placing Calls
Due to the flexibility built into the system, your
Dialing Codes
and
Feature Capacities
may differ from those in this guide. Check with
your communications manager and make a note of any differences.
0893409.QXD 7/8/03 2:22 PM Page 1