Manuel d’utilisation climatiseur fixé au mur veuillez li re le manuel d'utilisation soigneusement avant d'employer le produit model di09ss1a/dldi09ss1b di12ss1a/dldi12ss1b di18ss1a/dldi18ss1b di24ss1a/dldi24ss1b modÈl di09ss1a/dldi09ss1b di12ss1a/dldi12ss1b di18ss1a/dldi18ss1b di24ss1a/dldi24ss1b.
Contents heat pumps are units that should be installed by professional technicians. This instruction manual is the all-purpose version for the mini-split, wall-mounted heat pumps manufactured by north cool. The appearance of the units that you purchased might vary slightly from the ones described in...
Instructions for installation instructions to users please read the instruction manual carefully prior to the use of your heat pump so as to ensure proper operation. Make sure you have the professional after-sale service persons of our company or the authorized dealers install the units before you u...
Try to avoid the sunlight and hot air from entering the room. During the cooling operation, curtains or window-blinds should be used to shade of the sunlight. Try to minimize the use of heat-generating devices during cooling operation. Place heat sources out of the room. Do not use combusting appara...
The name of each part and its functions because there are many models, features and appearance may vary. The following diagram introduces the general principle. Drain the water dehumidified out of the air indoor unit air return grid takes in the indoor air air filter operational performance / indica...
Indication of units operation panel display - 5 - sleeping indicator running indicator timer indicator setting temperature timer, time and malfunction code indicator timer indicator remote control signal receiver operation mode indicator fan speed indicator defrosting indicator room temperature indi...
Operation panel - 6 - 1. On/off button to turn the air conditioner on, press the button. To turn the air conditioner off, press the button again. 2. Mode button press this button to change the operation mode : auto – cool – dry – fan– heat. The selected operation mode will display on the screen. 3. ...
Operation and indication sections of remote controller. - 7- temperature indicator auto indicator cooling indicator drying indicator heating indicator faning indicator swing indicator indicates selected flap mode. This button changes the operation mode: auto, cool,heat, dry, fan time indicator set t...
Use of remote controller - 8 - operating machine in selected modes 1. Point the remote controller at the unit, press the on/off button, then press the mode button, select the needed mode: auto, cool, dry, heat, or fan. 2. Press the set temperature button to increase or decrease the readings until th...
Use of r emote controller - 9 - opÉration sommeil utilisez le mode sommeil pour réduire le bruit qu’émet le climatiseur lorsque vous dormez. Pesez le bouton sleep pour réduire le bruit causé par la circulation de l’air . Pesez de nouveau ce bouton pour mettre fin au mode sommeil. Note : - utilisez l...
- 10 - note: if the air filter screen is blocked by dust or dirt, the performance of cooling and heating will be affected, with the operation noise and power consumption increased. Therefore, the air filter screen should be cleaned regularly. Methods of maintenance the heat pump must be turned off a...
Treatment at service call check the following before requesting after-sale service from your dealer. The heat pump does not operate at all. Is the power plug in an outlet? Is the time set to “on” position? Is there a power failure or a blown fuse? Poor cooling or heating performance. Is the room tem...
An audible cracking sound. Remain aware of the following tenez comptes de ces élements en util isant le clima tiseur the unit cannot be restarted just after shut down. (run indicator is illumnating) not operate restart is stopped for 3 minutes after shut down to protect unit. Please wait for 3 minut...
Installation of electric components points of attention hacr type breaker should be utilized along with proper installation. Make sure of the applicable voltage and cables or wires for the specific model to be used, before doing the connections. Read the prompts at the terminal board for wiring. Mak...
