North Cool DI09SS1A User Manual - page 7
Operation panel
- 6 -
1. ON/OFF button
To turn the air conditioner ON, press the button. To turn
the air conditioner OFF, press the button again.
2. MODE button
Press this button to change the operation mode :
AUTO – COOL – DRY – FAN– HEAT.
The selected operation mode will display on the screen.
3. TEMP +/- button
Press the +/- button to adjust setting temperature within
a range of 16°C to 32°C. In AUTO DRY mode it will
adjust automatically to 25°C.
4. FAN SPEED button
Press this button to set air rate you want:
HIGH – MED – LOW – AUTO (IT would be automatically
set at LOW speed and un-adjustable in DRY mode).
5. 6. 7.
SHUT-OFF TIME OPERATION PROCEDURE
Panneau des opér
ations
- 6 -
1. Bouton ON/OFF
Pour démarrer l’air climatiseur, pesez ON. Pour éteindre
l’air climatiseur, pesez de nouveau le même bouton.
2. Bouton MODE
En pesant ce bouton, vous pouvez circuler parmis les
options suivantes : AUT
O (automatique) – COOL
(climatiser) – DRY
(déshumidifier) – FAN (ventilateur) –
HEAT
(chauffage). L
’écran indiquera le mode sélectioné.
3. Bouton TEMP
+/-
Pesez le bouton +/- pour ajuster la température entre
16°C et 32°C. En mode AUT
O il s’ajuste automatique-
ment à 25°C. La température ne peut être ajustée en
mode AUT
O et DRY
.
4. Bouton FAN SPEED
Pesez ce bouton pour sélectioner la vitesse du
ventilateur désiré : HIGH (fort) – MED (moyen) – LOW
(faible) – AUT
O (En mode automatique, la vitesse est
règlé à LOW et ne peut être ajustée lors du mode DRY).
5. 6. 7.
PROCÉDURE POUR AJUSTER L
’HEURE ACTUELLE
1. Pesez le bouton SET (5) et
TIMER (6) ensemble pour plus de 2 secondes.
2. Pesez le bouton CLOCK +/- (7) pour sélectioner AM ou PM.
3. Pesez le bouton SET (5) pour pouvoir ajuster l’heure. Ce dernier va clignoter
.
4. Pesez le bouton CLOCK +/- (7) pour changer l’heure. À chaque fois que vous pesez ce bouton, il avance
avancel’horloge de 1 heure de la manière suivante : 1 heure → 2 heures → etc. →12 heures maximum.
5. Pesez le bouton SET (5) de nouveau et l’indicateur MIN clignote.
6. Pesez le bouton CLOCK +/- (7) pour changer les minutes. À chaque fois que vous pesez ce bouton, il
avance avancel’horloge de 1 minute de la manière suivante : 1 minute → 2 minutes → etc. →60 minutes
maximum.
7. Pesez SET (5) pour confirmer l’heure choisie sinon le système va automatiquement quitter le mode
d’ajustement de l’heure après 5 secondes.
PROCÉDURE POUR ALLUMER L
’APPAREIL
AUT
OMATIQUEMENT
1. Si l’appareil est en mode attente, pesez le bouton TIMER (6), et l’indicateur
TIMER ON clignote.
2. Pesez le bouton SET (5) pour pouvoir ajuster l’heure de la minuterie, et pesez le bouton CLOCK +/- (7) pour
sélectioner AM ou PM de la minuterie. Pour terminer d’ajuster la minuterie, suivez les procédures 3, 4, 5, 6, 7
du protocole nécessaire pour ajuster l’heure actuelle.
8. Bouton Del
PROCÉDURE POUR INTERROMPRE UNE MINUTERIE EN COURS
Lorsque l’indicateur TIMER ON ou
TIMER OFF clignote (pesez le bouton TIMER (6) pour vérifier), pesez le
bouton DEL (8) pour annuler la minuterie d’éteinte ou d’allumage automatique.
1. Press the button SET (5) and TIMER (6) together for .
2. Press the button CLOCK +/- (7) to select AM or PM.
3. Press the button SET (5) to adjust the hour, which will blink on the display.
4. Press the button CLOCK +/- (7) pour to add one hour. Every time this button is pressed, the clock will
add/remove one hour to the time.
For example: 1 hours → 2 hours → etc. →12 hours maximum.
5. Press the button SET (5) again the indicator MIN will blink.
6. Press the button CLOCK +/- (7) to add/remove minutes. Every time this button is pressed, the clock will
add/remove one minute to the time. For example: 1 minute → 2 minutes → etc. →60 minutes maximum.
7. Press SET (5) to confirm the selected hour, or else the system will automatically quit timer set mode after
5 seconds.
PROCÉDURE POUR ALLUMER L’APPAREIL AUTOMATIQUEMENT
1. If the unit is in standby mode, press TIMER button (6), and the TIMER ON indicator on the display is
blinking.
2. Press the button CLOCK +/- (7) to select the timer time you want. Every time you press it, it advances the
time setting as follows: 1 hour → 2 hours → etc. →12 hours maximum.
8) Del Button
TIMER OPERATION RELEASING PROCEDURE
When the display “TIMER ON” or “TIMER OFF” indicator is flickering ( Press TIMER button (6) to enter), at
this time, press DEL button (8) to cancel shutoff or start time (TIMER ON or TIMER OFF) operation.