Northern Industrial Tools 998255 Owner's Manual - page 11
Page of 14
11
MAINTENANCE
WARNING:
Make sure this tool is turned off and disconnected from its power source before
attempting any maintenance, cleaning, or inspection.
It is recommended that the general condition of any tool be examined before it is used. Keep
your tools in good repair by adopting a program of conscientious repair and maintenance in
accordance with the recommended procedures found in this manual. If any abnormal vibrations
or noise occurs, turn the tool off immediately and have the problem corrected before further use.
Have necessary repairs made by qualified service personnel.
After use, immediately wash out all debris from the inside and outside of the Cement Mixer.
Keep the motor clean and free of build up.
Do not apply water in or around the Motor Base Cover.
Retighten belt after the every 25 hours of use. The belt should be able to be pressed in no
more than 1/4".
Periodically recheck all nuts, bolts, and screws for tightness.
Lightly grease all moving parts.
Fig. J