O-Synce MIXpro Quick Start Manual - page 15

5 SPORT-MODE

The SPORT-Mode offers several options:

_ Stop watch with 99 laps

_ Speed, distance and cadence  for biking or running

_ Heart frequency

_ Personal settings

_ Data recording

_ Recording max. 7 hours

If you don’t use any sensor, only the stop watch is working. Any sensor which is paired will

be shown permanently as symbol on the display. 

USE OF THE STOP WATCH WITHOUT ANY SENSOR

START

press A - START will be shown

LAP TIME

press D during the recording

STOP

press A - STOP will be shown

ERASE THE  RECORDING press & hold D for 3 Secunds - SAVE will be shown 

(lower area), YES blinks up. Press A or D to switch to NO. 

Press B to confirm

SAVE THE  RECORDING

press & hold D for 3 Secunds - SAVE will be shown 

(lower area), YES blinks up. Press B to confirm

USE OF THE STOP WATCH WITH SENSORS

The following sensors can be used:

_ HEART2feel 

_ MAXrun (optional)

_ MACROX 2Sspe (optional)

_ MACROX 2Scad (optional)

NOTE: You can’t use the foot pod together with the bike speed sensor (MACROX 2Sspe)

For the use of the ‚stop watch with sensors‘ have a closer look at the diagram below.

After the start of the stop watch you can change the shown data in the upper display by

pressing B once. Heart frequency (HR) <B> Distance (DIST) <B> SPEED <B> CAD

<B>LAP <B> Stop watch (SPLIT) 

If you press & hold B the data in the lower display will be changed: 

Heart frequence (HR) > Distance (DIST) > SPEED >CAD > STEPS,  not by using the bike

sensors > calories (CALS) > Stop watch (SPLIT) > LAP 

_14