Oce CM4520 User Manual - 3.4
Basic Copy Operations
3
cm4520
3-21
B
a
s
ic
Co
py
O
per
ati
o
n
s
Chap
ter
3
3.4
Specifying Original Settings
The following procedure describes how to specify the type of document to
be copied.
Copying Documents of Mixed Sizes (“Mixed Original” Setting)
Documents of different sizes can be loaded together into the ADF to be fed
and scanned one by one automatically.
The possible combinations of document sizes differ depending on the widest
document loaded (position of the adjustable document guides of the ADF).
0 Do not load more than 100 sheets or so many sheets that the top of the
stack is higher than the , mark, otherwise a document misfeed or dam-
age to the document or machine may occur. However, a document that
exceeds 100 pages can be scanned in separate batches. For details, re-
fer to “Scanning the Document in Separate Batches (“Separate Scan”
Setting)” on page 3-12.
0 If the document is not loaded correctly, the document may not be fed in
straight or a document misfeed or damage to the document may occur.
1
Slide the adjustable document guides to fit the size of the largest page.
–
If large-sized documents are to be loaded, pull out the document
support.
–
For details on the document sizes that can be mixed in the ADF, re-
fer to “Documents That Can Be Loaded into the ADF” on
page 7-26.
2
Arrange the document
pages so that the side to
be copied (first page)
faces up, as shown in
the illustration.