Oce CM4520 User Manual - 3.12
3
Basic Copy Operations
3-70
cm4520
B
a
s
ic
Co
py
O
per
ati
o
n
s
Chap
ter
3
3.12
Selecting Finishing Settings
Various settings are available for sorting and finishing copies when they are
fed into the copy exit tray.
The Staple settings are available only if optional finisher 9238 or finisher 9293
is installed.
The Punch settings are available only if optional finisher 9293 is installed or
punch kit is installed on finisher 9238.
2
Note
The factory default setting is “Group”.
!
Detail
If no finisher is installed and the following conditions are met, printed
copies can be fed out and sorted in an alternating crisscross pattern.
8-1/2 × 11- or 5-1/2 × 8-1/2-size paper is used.
Paper of the same size and type is loaded with the w orientation in one
paper drawer and with the v orientation in another drawer.
The “Auto Paper Select” setting is selected.
The “Auto Paper Select” setting is not selected when the “Mixed Original”
setting is selected.