Oce CM4520 User Manual - 3.6

Basic Copy Operations

3

cm4520

3-37

B

a

s

ic

 Co

py

 O

per

ati

o

n

s

Chap

ter

 3

3.6

Selecting a Paper Setting

The paper size can be selected automatically according to the document 

size or it can be specified manually. Specify the paper size according to the 

corresponding procedure, depending on the desired copy settings.

2

Note 

If a setting for special paper is selected for a paper drawer, that drawer 

is not selected automatically with the “Auto Paper Select” setting. (How-

ever, a paper drawer set to “Single Side Only” is given priority to be se-

lected.) This setting is useful for paper drawers loaded with special paper. 

For details, refer to “To specify a setting for special paper” on page 7-22.

The default setting is “Auto Paper Select”.

For details on the operations that cannot be combined, refer to “Opera-

tions That Cannot Be Combined” on page 3-5.

The “Auto Zoom” and “Auto Paper Select” settings cannot be selected at 

the same time. If the “Auto Zoom” setting was selected, the Zoom screen 

appears. In the Zoom screen, specify the desired zoom setting.

Automatically Selecting the Paper Size (“Auto Paper Select” Setting)

The size of the loaded document is detected, and copies are produced using 

paper of the same size.

If the “×1.0” Zoom setting was specified, paper of the same size as the doc-

ument is selected.

If the zoom ratio was increased or decreased, a paper size that corresponds 

to the specified zoom ratio is automatically selected.

1

In the Basic screen, touch [Paper].

The Paper screen appears.