Oce ColorWave 300 User Manual - page 18
Caution labels and notations
Introduction
You can find the power-marking label near the mains entrance. If connection to a different
mains voltage is required, contact Customer Service.
Caution:
Do not remove caution labels or caution notations. If a label or notation is soiled, please
clean the label or notation. If you cannot make label or notation legible, or if the label
or notation is damaged, please contact your service representative.
Note:
In order to limit energy consumption during times of non-use the Océ ColorWave 300
has a Sleep mode during which the power level is reduced. The value for the Sleep mode
is listed in the Product Safety Data Sheet.
Space Requirements and Operating Precautions (Power Supply)
Please refer to the corresponding Safety Data Sheets for specific safety information. You
can download the Safety Data Sheets from the support site relevant to your product at
http://global.oce.com/support/
Operating environment
The environmental requirements for correct operation of the machine are as follows:
■
Operating temperature (T): 15 °C (59 °F) to 30 °C (86 °F)
■
Relative Humidity(RH): 20 % to 80 %
Chapter 3 - General information
18
Caution labels and notations