Oce im2330 Quick Start Manual - page 44
42
5.SETUP FLOW
6.SETUP FLOW FOR PRINTING FEATURES (Cont.)
5
Setup Flow for Raw TCP/LPR Printing
This equipment can be used with Raw TCP or LPR printer connection for Windows NT 4.0, Windows
2000, Windows XP, and Windows Server 2003. Raw TCP or LPR printing is the common method to setting
up the printer from servers.
Setup Flow
Description/Reference
Connect this equip-
ment
Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE
•
Chapter 4 “CONNECTING TO THE DEVICE”
“2. CONNECTING TO THE NETWORK”
Set up the TCP/IP
Assign the IP address, Subnet mask, Gateway address.
Reference: USER FUNCTIONS GUIDE
•
Chapter 4 “SETTING ITEMS (ADMIN)”
“3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol”
Reference: Printer Utility Guide
•
Chapter 7 “Printer Utility ADMINISTRATOR MODE”
“Setting up from Printer Utility”
“Setting up Network Settings”
“Setting up the TCP/IP”
Set up the Printing
Service
If users use Windows 2000, Windows XP, or Windows Server 2003 for printing,
enable the Raw TCP Printing Service using Printer Utility. It is recommended
to use Raw TCP printing rather than LPR printing.
Reference: Printer Utility Guide
•
Chapter 7 “Printer Utility ADMINISTRATOR MODE”
“Setting up from Printer Utility”
“Setting up Print Service Settings”
“Setting up the Raw TCP Print”
If any users use Windows NT 4.0, enable the LPD Printing Service using
Printer Utility.
Reference: Printer Utility Guide
•
Chapter 7 “Printer Utility ADMINISTRATOR MODE”
“Setting up from Printer Utility”
“Setting up Print Service Settings”
“Setting up the LPD Print”
Windows NT 4.0
Windows 2000
Windows XP
Windows Server 2003
Connecting over TCP/IP Network
Setting up the Raw TCP
or LPR printer connection
Ð
Ð
Ð
Ð
Ð
Ð
Ð