Oce im2330 Quick Start Manual - page 74
72
5.SETUP FLOW
8.SETUP FLOW FOR FAX FEATURES (Cont.)
5
If you want to send an internet fax using the N/W-Fax driver, you must configure the equipment to enable
the Internet Fax transmission.
P.73 "Setup Flow for Internet Fax"
Set up the TCP/IP
Assign the IP address, Subnet mask, Gateway address. Also, configure the
WINS settings if your Windows network is managed with the WINS server.
Reference: USER FUNCTIONS GUIDE
•
Chapter 4 “SETTING ITEMS (ADMIN)”
“3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol”
Reference: Printer Utility Guide
•
Chapter 7 “Printer Utility ADMINISTRATOR MODE”
“Setting up from Printer Utility”
“Setting up Network Settings”
“Setting up the TCP/IP”
Setting the Terminal ID If the optional Fax unit is installed, specify the terminal ID to identify the fax ter-
minal information.
Reference: USER FUNCTIONS GUIDE
•
Chapter 4 “SETTING ITEMS (ADMIN)”
“5. SETTING FAX FUNCTIONS”
“Setting the Terminal ID”
Reference: Printer Utility Guide
•
Chapter 7 “Printer Utility ADMINISTRATOR MODE”
“Setting up from Printer Utility”
“Setting up Fax Settings”
“Setting up the Fax Settings”
Set up the Save as file
Setting
An administrator should specify the Save as file destination and network folder
to enable the Save as file features on the N/W-Fax driver.
Reference: Printer Utility Guide
•
Chapter 7 “Printer Utility ADMINISTRATOR MODE”
“Setting up from Printer Utility”
“Setting up Save as file Settings”
“Setting up the N/W-Fax Destination”
•
Chapter 7 “Printer Utility ADMINISTRATOR MODE”
“Setting up from Printer Utility”
“Setting up Save as file Settings”
“Setting up the N/W-Fax Folder”
Install the Client Soft-
ware
Install the N/W-Fax driver from the Client Utilities CD-ROM.
Reference: Network Fax Guide
•
Chapter 2 “INSTALLING CLIENT SOFTWARE”
“Installing Network Fax Software
Setup Flow
Description/Reference
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð