Oce im2330 Quick Start Manual - page 60
58
5.SETUP FLOW
6.SETUP FLOW FOR PRINTING FEATURES (Cont.)
5
Setup Flow for Unix Workstation
This equipment supports printing for Unix workstations using the Unix Filters or CUPS.
The printing features are available only when the Printer Kit is installed, or when the Printer/Scanner Kit is
installed.
Setup Flow for LPR Printing
This equipment provides the Unix filters to print from Unix workstations. You can perform LPR printing
from the Unix workstation using the Unix filters.
Setup Flow
Description/Reference
Connect this equip-
ment
Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE
•
Chapter 4 “CONNECTING TO THE DEVICE”
“2. CONNECTING TO THE NETWORK”
Set up the TCP/IP
Assign the IP address, Subnet mask, Gateway address.
Reference: USER FUNCTIONS GUIDE
•
Chapter 4 “SETTING ITEMS (ADMIN)”
“3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol”
Reference: Printer Utility Guide
•
Chapter 7 “Printer Utility ADMINISTRATOR MODE”
“Setting up from Printer Utility”
“Setting up Network Settings”
“Setting up the TCP/IP”
Set up the Printing
Service
Enable the LPD Printing Service using Printer Utility.
Reference: Printer Utility Guide
•
Chapter 7 “Printer Utility ADMINISTRATOR MODE”
“Setting up from Printer Utility”
“Setting up Print Service Settings”
“Setting up the LPD Print”
Unix workstation
Connecting over TCP/IP Network
Setting up the LPR
printer connection
Ð
Ð
Ð
Ð
Ð