Oce im2330 Quick Start Manual - page 70
68
5.SETUP FLOW
7.SETUP FLOW FOR SCANNING FEATURES (Cont.)
5
Setup Flow for Scan to E-mail
The Scan to E-mail feature allows users to send scanned images over the Internet to client computers.
The Scan to E-mail feature is available only when the Scanner Kit is installed, or when the Printer/Scanner
Kit is installed.
When configuring the Scan to E-mail environment, this equipment sends an E-mail to the SMTP server
and transfers the document to the Internet. A DNS server is required for the SMTP server to transmit the
Scan to E-mail document into the Internet. This function can be used to send scanned images to the com-
puters. Do not use this function to send scanned images to other MFPs.
Setup Flow
Description/Reference
Connect this equip-
ment
Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE
•
Chapter 4 “CONNECTING TO THE DEVICE”
“2. CONNECTING TO THE NETWORK”
Set up the TCP/IP
Assign the IP address, Subnet mask, Gateway address. Also, configure the
WINS settings if your Windows network is managed with the WINS server.
Reference: USER FUNCTIONS GUIDE
•
Chapter 4 “SETTING ITEMS (ADMIN)”
“3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol”
Reference: Printer Utility Guide
•
Chapter 7 “Printer Utility ADMINISTRATOR MODE”
“Setting up from Printer Utility”
“Setting up Network Settings”
“Setting up the TCP/IP”
Connecting to Internet
Internet
Scan to Email
Send email to the Internet
via SMTP server
SMTP Server
Ð
Ð
Ð