Oce im2330 Quick Start Manual - page 62
60
5.SETUP FLOW
6.SETUP FLOW FOR PRINTING FEATURES (Cont.)
5
Setup Flow for IPP Printing
This equipment can be used with the IPP printer connection for Unix workstation in a TCP/IP network
using CUPS. Even though IPP printing can be used in a local area network, this method is commonly used
to print over the Internet. If you allow IPP printing through the Internet, you must configure the DNS server
to enable users to access this equipment over the Internet using the HTTP protocol. This is useful when
users want to print to this equipment from outside the local area network.
Setup Flow
Description/Reference
Connect this equip-
ment
Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE
•
Chapter 4 “CONNECTING TO THE DEVICE”
“2. CONNECTING TO THE NETWORK”
Set up the TCP/IP
Assign the IP address, Subnet mask, Gateway address.
Reference: USER FUNCTIONS GUIDE
•
Chapter 4 “SETTING ITEMS (ADMIN)”
“3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol”
Reference: Printer Utility Guide
•
Chapter 7 “Printer Utility ADMINISTRATOR MODE”
“Setting up from Printer Utility”
“Setting up Network Settings”
“Setting up the TCP/IP”
Set up the DNS
(Optional)
If you want to print from the Internet, configure the DNS settings using Printer
Utility to enable accessing to this equipment over the Internet. Also, if the DNS
server supports the Dynamic DNS, enable the DDNS as well.
Reference: Printer Utility Guide
•
Chapter 7 “Printer Utility ADMINISTRATOR MODE”
“Setting up from Printer Utility”
“Setting up Network Settings”
“Setting up the DNS Session”
•
Chapter 7 “Printer Utility ADMINISTRATOR MODE”
‘ “Setting up from Printer Utility”
“Setting up Network Settings”
“Setting up the DDNS Session”
Unix workstation
Connecting over Internet
Setting up the IPP
printer connection
using CUPS
Ð
Ð
Ð
Ð
Ð
Ð
Ð