Oce im3530 Operator's Manual - 290
Other manuals for im3530:
Quick Start Manual, Scanning Manual, Quick Reference Manual, Printing Manual, Operator's Manual
Manual is about: For Océ and Imagistics Models
of
358
290
9.BLINKING GRAPHIC SYMBOLS
5.Jam Symbols (Cont.)
9
Releasing a paper misfeed in the Finisher and the Hole Punch Unit
(optional: 9286/9286EU, CM4530040)
1
Hold up the guide and remove any mis-
fed paper in the paper exit area.
• When the Hole Punch Unit (optional: CM4530040) is installed,
proceed to step 2. If not installed, proceed to step 6.
2
Open the front cover of the Hole Punch
Unit.
3
Turn the green knob to locate the triangle
mark within the area indicated on the
label.
• Under this condition, the punchers are up.
4
Raise the Hole Punch Unit, and remove
any misfed paper.