Oce im3530 Operator's Manual - 4. Proof Copy

80

2.HOW TO MAKE COPIES

2

4. Proof Copy

This function allows you to check that the copy density, zoom and margin width, etc. are properly set by 

making only one set of copies.

You can prevent miscopying by using this function before committing yourself to mass-copying.

•

The setting of the number of copy sets, page number, time stamp, sort/stapling (when the optional Fin-

isher has been installed) and hole punch (when the optional Hole Punch Unit has been installed) can 

be changed after having made the proof copy.

•

Press the [MEMORY CLEAR] button to clear the proof copy before changing the setting of the zoom or 

copy density, etc. When you make copies again after changing the settings, the data of the originals 

need to be scanned.

1

Place paper in the drawer(s).

2

Place the original(s).

3

Select the copy modes as required.

4

Press the [PROOF COPY] button.

• "PROOF COPY is set Press START button to copy" appears (for approx. 2 sec.).

• Copy modes except for some such as sort/group can be set.

5

Press the [START] button.

• The data scanning of the originals is started and one set of cop-

ies is made.