Oce im3530 Operator's Manual - 2. Making Copies

63

2

2. Making Copies

Initial (Default) settings

When the power is turned on, when the energy saving mode is cleared, and when the [FUNCTION 

CLEAR] button on the control panel is pressed, various setting items are automatically set. These items 

are called the initial (default) settings. Set originals after placing paper or confirming that there is paper in 

the drawers. When the [START] button on the control panel is pressed with any of the settings unchanged, 

copies are made in the initial (default) settings. You can make copies as desired by setting various copy 

modes.

The table below lists the various items of the initial settings at the time of installation of this equipment.

•

These initial settings can be changed as desired. See the User Functions Guide for details.

Item

Initial (Default) setting

Reproduction ratio

100%

Copy quantity

1

Paper selection

Automatic Paper Selection (APS)

Original -> Copy

1-Sided -> 1-Sided

Density adjustment

Automatic copy density adjustment

Original mode

TEXT/PHOTO

Finishing mode

Placing originals on the original glass: Non-sort/

Non-staple mode

Placing originals on the Reversing Automatic Doc-

ument Feeder (optional): Sort mode

Feeding mode when originals are placed on the 

Reversing Automatic Document Feeder (optional)

Continuous feed mode