Oce im3530 Operator's Manual - page 81
Other manuals for im3530:
Quick Start Manual, Scanning Manual, Quick Reference Manual, Printing Manual, Operator's Manual
Manual is about: For Océ and Imagistics Models
of
358
77
2
3
Press the [NON STANDARD] button on the touch panel.
4
Set each dimension following the procedure below.
The [Length] and [Width] are indicated as follows:
A: [Length]
B: [Width]
Using the digital keys
Key in the value in [Length] and press the [SET] button on the touch panel. Set the width in the same
way and press the [ENTER] button.
A
B