Oce WP36/50 Operation Manual - Precautions For Use

ix

Precautions for Use

■

Cautions when Using the Printer

WARNING

•Do not place metallic objects or containers with wa-

ter (flower vases, flower pots, cups, etc.) on or near

the printer. This type of situation presents a danger

of fire or electrical shock should they fall inside. ....

•Do not remove any of the covers from the printer as

there is a danger of electrical shock from high volt-

age parts inside the printer.  .....................................

•Do not damage, break or attempt to repair the

power cord. Do not place heavy objects on the cord,

pull it, bend it unnecessarily or cause any other

type of damage.

These types of situations present a danger of fire or

electrical shock. .........................................................

•Never attempt to repair or disassemble the printer

or its parts as there is a danger of fire, electrical

shock or damage to the laser. If the laser beam es-

capes, there is a danger of it causing blindness. .....

•If the printer becomes excessively hot, smoke ap-

pears from the printer, there is an odd smell, or any

other abnormal situation occurs, there is a danger

of fire or electrical shock. Turn the power switch

OFF (O

O

O

O) immediately, remove the power plug from

the outlet and contact your service representative. 

•If anything harmful (paper clips, water, other flu-

ids, etc.) falls into the printer, turn the power switch

OFF (O

O

O

O) immediately. Next, remove the power plug

from the outlet to avoid the danger of fire or electri-

cal shock. Then contact your service representative. 

•Do not remove or connect the power plug with wet

hands, as there is a danger of electrical shock. .......

•Always contact your service representative for main-

tenance or repair of internal parts.  ...........................

CAUTION

•Do not pull the power cord when removing it from

the outlet. If the power cord is pulled, the wires may

become broken and there is a danger of fire or elec-

trical shock. (ALWAYS grasp the power plug when

removing the power cord from the outlet.)  ..............

•Always remove the power plug from the outlet when

moving the printer. If the power cord is damaged,

there is a danger of fire or electrical shock.  ............

•If the printer will not be used for a short period of

time (overnight, etc.), turn the power switch OFF

(O

O

O

O).

If it will not be used for an extended period of time

(vacations, etc.), remove the power plug from the

outlet for safety purposes during the time the

printer is not in use.  .................................................

•When lifting or moving the printer, pull up the 4

handles on both sides of the printer, then ALWAYS

carry the printer by the designated 4 handles with

at least 4 people, one person to a handle..................

•For safety purposes. Always remove the power

plug from the outlet when performing cleaning

operations. ............................................................

•If dust accumulates within the printer, there is a

danger of fire or other trouble. It is therefore recom-

mended that you consult with your service repre-

sentative in regard to the cleaning of internal parts.

This is particularly effective if accomplished prior to

seasons of high humidity. Consult with your service

representative in regard to the cost of cleaning the

internal parts of the printer.  .....................................

Other Precautions

•Do not place heavy objects on the printer or cause

other damage to the printer.

•Do not open the front cover, turn off the main switch,

or pull out the power plug during printing.

•During printing, some ozone is released, but the

amount does not cause any ill effect to one’s health.

If, however, the printer is used over a long period of

time in a poorly ventilated room or when printing

an extremely large number of copies, the smell may

become unpleasant. To maintain the appropriate

environment for print work, it is suggested that the

room be properly ventilated.

•Do not touch electrical parts, such as connectors or

printed circuit boards. They could be damaged by

static electricity.

•Do not attempt to perform any operations not ex-

plained in this handbook.

•Caution: Use of controls or adjustments or perfor-

mance of procedures other than those specified

herein may result in hazardous radiation exposure.

•If the printer will not be used for an extended pe-

riod of time, remove the paper from the cassette, re-

turn it to its original package and reseal it.